
Description
Standard Orthopedic Bone Impactor
Non-Guarded Working End · Round Handle · Technical Evaluation & OEM Sourcing
Product Overview
The Standard Orthopedic Bone Impactor is presented as a reference instrument configuration for professional orthopedic surgical instrument procurement, technical evaluation, and OEM manufacturing enquiries.
The referenced design features a non-guarded working end measuring 7.0 × 12.5 mm, a round handle, and an overall length of 8½ inches (approximately 216 mm).
The dimensional description is based on the cited third-party catalog reference, Ambler Surgical 45-431.
ORTHOSURGI offers this information to support specification review and sourcing discussions. The reference dimensions, product photograph or illustration, material description, and intended application do not independently establish an approved ORTHOSURGI-manufactured instrument.
Actual manufacturing capability, product specifications, inventory, sample availability, and regulatory status require written confirmation.
Technical Specifications
Specification Reference information
Instrument name Standard Orthopedic Bone Impactor
Instrument pattern Standard, non-guarded
Working-end dimensions 7.0 × 12.5 mm
Overall length 8½ inches / approximately 216 mm
Handle configuration Round
External reference Ambler Surgical 45-431
ORTHOSURGI SKU Not assigned or verified
Reference material Stainless steel, according to the cited external description
Reference reuse status Reusable, according to the cited external description
Reference packaging status Non-sterile, according to the cited external description
ORTHOSURGI material grade Pending verification
ORTHOSURGI manufacturing status Not confirmed
Physical stock Not verified
Regulatory status Not established
OEM availability Subject to feasibility review
These are third-party reference characteristics, not an approved ORTHOSURGI product specification or verified inventory record.
Working-End Design and Instrument Geometry
The reference configuration incorporates a standard, non-guarded working end.
Relevant technical evaluation requirements include:
• Working-end width
• Working-end length
• Contact-surface geometry
• Tip profile
• Instrument alignment
• Overall working length
• Handle geometry
• Surface finish
• Relevant dimensional tolerances
The approved technical drawing should define how working-end dimensions are measured and which tolerances apply.
Catalog dimensions alone are insufficient to establish full manufacturing acceptance criteria.
Round Handle Configuration
The referenced instrument has a round handle.
A proposed ORTHOSURGI version would require verification of:
• Handle dimensions
• Handle surface profile
• Overall instrument length
• Shaft-to-handle geometry
• Material specification
• Relevant surface and functional requirements
Handle appearance in a rendering should not be treated as proof of manufactured dimensions or approved ergonomic performance.
Standard Orthopedic Bone Impactor
Instrument Application and Intended Use
The cited third-party reference describes an orthopedic impactor pattern associated with bone graft or bone-part impaction.
However, this does not establish the approved intended use, clinical suitability, or operating instructions of any ORTHOSURGI-manufactured version.
The intended use must be defined by the responsible legal manufacturer and supported by appropriate technical and regulatory documentation.
Product selection and clinical use must follow the applicable manufacturer instructions, institutional procedures, and qualified professional judgment.
Standard vs. Guarded Orthopedic Impactors
The standard reference pattern should be distinguished from a guarded impactor design.
Characteristic Standard reference Guarded reference
External catalog reference Ambler 45-431 Ambler 45-430
Design designation Standard / non-guarded Guarded
Working-end dimensions 7.0 × 12.5 mm reference Requires separate verification
Full geometry Requires approved drawing Requires approved drawing
ORTHOSURGI availability Not verified Not verified
A guarded designation does not, by itself, establish the instrument's complete geometry, application or compatibility.
Material, Surface Finish and Inspection
A proposed production specification should define the exact material and relevant inspection requirements.
Professional buyers may request:
• Approved material grade
• Material certificate availability
• Controlled engineering drawing
• Working-end dimensional tolerances
• Surface-finish requirements
• Functional acceptance criteria
• Inspection methods
• Instrument identification requirements
• Reprocessing documentation
• Relevant regulatory evidence
No specific stainless-steel grade, hardness, corrosion performance, or completed inspection is claimed for an ORTHOSURGI version without verification.
Standard Orthopedic Bone Impactor
OEM and Private-Label Development
ORTHOSURGI welcomes technical enquiries from orthopedic instrument distributors, hospitals and qualified OEM or private-label partners.
Potential development requirements include:
• Reference drawing review
• Working-end geometry
• Dimensional specifications
• Material selection
• Handle configuration
• Sample approval
• Instrument identification
• Logo engraving where feasible
• Packaging requirements
• Inspection criteria
• Proposed order quantities
Any OEM development requires appropriate technical feasibility, required design rights, quality responsibilities, and written commercial approval.
Quality Documentation and Reprocessing
Reusable orthopedic instruments require applicable manufacturer-approved information addressing inspection, cleaning, maintenance, and reprocessing.
Buyers should request model-specific documentation appropriate to the intended market.
The cited reference's reusable and non-sterile descriptions cannot be automatically transferred to an ORTHOSURGI-manufactured version.
No sterilization method, validated reprocessing cycle, or clinical-use authorization is established for a proposed ORTHOSURGI model.
Frequently Asked Questions
What is a standard orthopedic bone impactor?
It is an instrument pattern associated with manufacturer-defined orthopedic applications. This listing describes a standard non-guarded reference configuration for technical evaluation and sourcing discussions.
What are the reference dimensions?
The cited reference has a 7.0 × 12.5 mm working end and an overall length of 8½ inches, approximately 216 mm.
What is the handle configuration?
The referenced instrument has a round handle.
What is the difference between the standard and guarded patterns?
The cited standard pattern is designated non-guarded, while the separate 45-430 reference is designated guarded. Exact differences require review of approved drawings.
Is this an Ambler Surgical product?
The technical description cites Ambler Surgical catalog reference 45-431. This reference must not be presented as an ORTHOSURGI product code or as evidence of an approved manufacturing relationship.
Is this impactor available from ORTHOSURGI?
Actual manufacturing or sourcing availability has not been confirmed. Buyers may request a technical feasibility and availability review.
Is the instrument made from stainless steel?
The cited external reference describes stainless steel. The material and exact grade of a proposed ORTHOSURGI version require independent verification.
Is the instrument reusable and non-sterile?
Those descriptions apply to the cited external reference. Any ORTHOSURGI product's labeling, reprocessing requirements, and supply status must be confirmed separately.
Can distributors request evaluation samples?
Qualified distributors may request a technical sample assessment. Availability, specifications, permitted evaluation use, costs, and delivery terms require written confirmation.
Does ORTHOSURGI offer OEM manufacturing?
Qualified OEM partners may submit technical drawings, quantities, materials, and identification requirements for feasibility review.
Request Technical Specifications and an OEM Quotation
ORTHOSURGI welcomes professional enquiries concerning this orthopedic impactor reference configuration.
Please provide:
1. Company or institution name
2. Destination country
3. Required working-end dimensions
4. Overall length and handle requirements
5. Material specification
6. Reference drawing or authorized design information
7. Proposed quantity
8. Technical documentation requirements
9. Sample evaluation needs
10. OEM branding or packaging requirements
Request a Standard Bone Impactor Technical Review
Request an OEM Feasibility Quotation
Email: dentic.surgical@gmail.com
Website: https://orthosurgi.com
Technical Specifications
Model: Standard Orthopedic Bone Impactor
SKU: OS-IMP-431
Technical details, including dimensions, jaw geometry, material grade and surface finish, require model-specific confirmation.
Request confirmed specificationsOEM & Private Label
ORTHOSURGI offers model evaluation and OEM/private-label enquiries for orthopedic surgical instruments. Discuss pattern selection, approved dimensions, product markings, logo placement, packaging and documentation before order confirmation.
Reviews
No verified customer reviews are displayed at present. Add a compatible Shopify reviews app block to enable real reviews.
Documents
No product-specific downloadable documents have been attached. Please request available model-specific documents.
Request documentationRequest a quotation for Standard Orthopedic Bone Impactor
Request technical details, specifications, quantities, and OEM or private-label options. Our team can confirm availability and documentation for your selected model.
Product: Standard Orthopedic Bone Impactor
SKU: OS-IMP-431
